How to make layouts like this ? Picture inside.

[MiRai]

Is it possible to work good situation like this (My spec computer will handle it)

1. window/game resolution 3840x2160 (4k)
2-3-4. window/games resolution 800/600

You've been told multiple times now that the aspect ratios need to match in order to even be semi-accurate. In my last post in this thread I said you divide the width by the height to find the aspect ratio, so let me do that for you now since you refuse to do it yourself.

3840/2160 = 1.78
800/600 = 1.33

Do those numbers match?

And working good, without any kind of dysonchonizate?

In order to run different resolutions, again, the aspect ratios need to match. You will also need to adjust your Repeater Profile to scale from the center.

Im sure if it can work good isboxer/multibox on this i can get all the time 60 FPS in every client. Now in 4 windows resolution 2560x1600 i have many drop 30-60 FPS.

Because you're trying to run the game clients at such a high resolution and Diablo III takes a lot of system resources. A lot of people think they have super computers until they begin multiboxing multiple game clients. Once they do they quickly learn that their computers aren't as 'super' as they thought. You can figure out system bottlenecks yourself - http://isboxer.com/wiki/HOWTO:Tweak_you ... ottlenecks

Just now i need change resolution for this 3x small for 800x600 and for big one for 4k and i want it work good. It really will be great if this can work, 4k resolution graphic its so great, much much better than 1600p.

Please advice somehow this step by step, im really appriceated.

I doubt 4K is going to look as good as you think in Windowed mode -- I'm sure you've been using it in Fullscreen mode and it's nice, but downsampling doesn't work all that great when windowed. Either way, there's no easy way to do this because you want something so super custom and you sound like you're incredibly new to the program and how Window Layouts work, but even then I don't know exactly how to go about creating the layout you want. You can try this if you'd like:

1) Turn off Instant Swapping in your Window Layout
2) Create a fifth region and set its size to 3840x2160
3) On the Swap Groups tab set the fifth region to be the Reset Region
4) Adjust regions 2, 3, and 4 to have a 1.78 (16:9) aspect ratio
5) Scale your Repeater Profile from the center
6) Export and launch your Character Set

Also, Diablo III is a game that doesn't like its resolution to be messed with and you might not be able to choose 4K @ 60 FPS -- You may have to end up running it at 30 FPS. You may also have to toggle between display modes in order to get 4K to even work, and I have no idea how well it's going to work if you ever expect to swap windows around.

EDIT2: For resolutions what i want the best scenario is to put on graphic settings diablo 3: "in window" "in full screnn window" or "full screen" I saw i have depends quality/FPS when im changing this, i dont understand.

You want to be using Windowed Fullscreen - viewtopic.php?f=40&t=3206

Thank u for your time and Resposne.

Im trying a little bit what u write but its really too difficult for me, and how u said totally ït will dont work.

So can i ask if its possible to make new sytuation (not so crazy like i said before).

1 account: 2560x1600 resolution
2,3,4 account: 800/600, or Higher if it will be the problem with ration or something like with 4k.

Now im using 4x 2560x1600 and i have framerate like 20-50fps. Im sure FPS will go up if i will put dont a little bit resolution on this 3 small windows.

2560x1600=2x1920x1080

If its possible to put any kind of for down resolution on 3 small window? It dont have to be 800/600 how i said. Even 1920x1080 will be helpfull or some like 1024x768, Please advice.


P.S I know if i got like 780 sli graphic card i will dont have problem like this with framerate, but i just have one 670 its the reason why i need to change this.


Thank u very much !!!

Please advice me.

[MiRai]

If you disable Instant Swapping and set the Reset Region to NONE, then each of your game clients will render at the resolution they're set to in the Window Layout.

Photo 1 - instant swamping - http://i.imgur.com/7ELULdy.jpg i turn off this option how u said.

Photo 2 - reset region "none?" - http://i.imgur.com/n8hddHD.jpg

I do what i think u said, but im not sure. I spend again 1 hour clicking, pressing, trying in this program to do 1 window 2560x1600 and another a little bit lower resolution 3 windows. But always dysonchronize. I put in option in diablo full screen and disconchronized. In full screen window, game dont change resolution and looks like crap, like in photo.

I really dont know how to do that. I look in wikipedia too for make this but i cant. Please last time step by step show me how to do this because i think what U write in last post im doing bad or i dont know.

...

[MiRai]

Photo 2 - reset region "none?" - http://i.imgur.com/n8hddHD.jpg

No, in the Swap Groups tab.

I do what i think u said, but im not sure. I spend again 1 hour clicking, pressing, trying in this program to do 1 window 2560x1600 and another a little bit lower resolution 3 windows. But always dysonchronize.

I already mentioned this in a prior post:

Scale your Repeater Profile from the center

So, find your Repeater Profile in the upper left pane, then in the lower right change the scaling method.

I put in option in diablo full screen and disconchronized. In full screen window, game dont change resolution and looks like crap, like in photo.

Probably because...

1) Your Window Layout determines what resolution your game clients are going to be using -- Stop trying to change your resolution in the game client

2) You're using some custom resolution that the game doesn't like (I can clearly see you're not using 2560x1600 by the images)

3) You're not using WINDOWED FULLSCREEN - I've already linked this thread before (viewtopic.php?f=40&t=3206)

But even if you're in Windowed Fullscreen you're not guaranteed to get a perfect picture because you are using a game resolution that the game doesn't like. The further you move away from a 16:9, 16:10, or 4:3 resolution, the worse the game client is going to be stretched out -- I'm sure there are some exceptions, but this is the way that Diablo III is.

Finally: http://i.imgur.com/FN8cpdK.jpg%27 1 account: 4k full, maximum details, 2-3-4: 1176x664 resolution lowest. All 4 accounts in FULL scren mode, work better like this for me and quality is same in main account like this compare for full scren in window. Its all about resolution desktop. 3 other account small window - i dont care about quality.

System cpu i put : let the game do it. GAP everey window 50/60fps.

I see the problem with FPS here droped its all about GPU. Im sure 1x 780gtx its not enough for stability 50-60fps in game in config multibox i create. I need sli 780 for 60 fps all the time. Its crazy for me.

So at this moment i know almost everything, thank u Mia for Help.

Now for be full, perfect happy i have to read/learn how to make round robin in skills and i see on this forum nice thing.

In the corner in diablo 3 some moderator got 4x small maps (when u press TAB) if i can do that, i can see all the time drop legend its much more comfortable.

Its possible to help me in this case? Its any propability with my skill i can do that? I really want try. I want be ready for patch 2.1 D3 ros ladders.

Thank u very much !!!

EDIT: I have question too, if i play on 4 account and sometimes i exit from 1 account from game, can i enter for this account and play still on multibox, without EXIT with all other 3 characeter, and again start the profile?