EVE Rubicon Broken with inner space.

as the title reads, log in the test server with the regular client and it works fine, use inner space launching the exe directly and the UI breaks with artifacts all over. text is garbled, buttons are lost, etc, etc.

http://i.imgur.com/KBeNQ8B.jpg

the window in the foreground is a client launched from the launcher. the ones in the background are the inner space windows. all launchers are on the new character select window.

the artifacts get worse when fully logged in, but somewhat clear out when in space, but the game is unplayable in station.

im guessing the new ui doesn't like having the screen resolution set to a different value.

as further proof that the problem is being caused by innerspace, just trigger the innerspace overlay. while the overlay is active, eve works and looks just like it should. as soon as the overlay fades out, eve is back to being all garbled and showing wire-frames.

please get this fixed before Rubicon goes live since this qualifies as client modification... we are not supposed to change the way the client renders stuff, not even unintentionally.

oh well, after a lot of tinkering with the client i found a temporary fix.


just add on innerspace the parameter /triPlatform=dx9, along the /server:Singularity and /noconsole commands.


the command /triPlatform=dx9 forces DX9.

the game continues to be broken with inner space and dx11

[lax]

Sorry, did you try the development build of Inner Space? There have been some Direct3D 11 fixes

Right click IS and select Patcher, check "Download development (test) patches" and then close and restart Inner Space to let it patch up

I check development patches, reload, got patch, but still see lag.
Once I activate repeater regions - all windows there it's applied become full of artifacts like in picture attached.
Can't find any other issues, because I am blocked with this repeater region issue.

And once I turn repeater region off - everything become fine instantly, without reloading EVE client.

Update: Articats appear hard in dock, but then I undock I see no artifacts, maybe I need to warp somethere, but at least station looks OK in space.

for me the problem is i start up the clients as soon as multiple clients are started by innerspace it will switch clients on it's own making it impossible to login and creating a disco stroboscope effect

i have 2 screens left is the main full screen and on the right screen i should have 3 smaller clients.
normally when i click one of them that particular client goes to the left screen in full screen mode.

this has worked for me until today with the release of rubicon it now switched clients to the main screen one after another automated it;s jsut flickering like a stroboscope and i see hte cleitns switch barely with the eye fro mleft to right.

[Shadowandlight]

Check here for a fix to use directx9

viewtopic.php?f=8&t=4968

I have the same problem as boxbabynl

for me the problem is i start up the clients as soon as multiple clients are started by innerspace it will switch clients on it's own making it impossible to login and creating a disco stroboscope effect

It starts to do this as soon as the third eve client gets loaded. After that, It still continues to load clients (4th, 5th ) at a slower rate, but with the same "disco stroboscope effect" which is an accurate description, even if it sounds weird. Sometimes, it stops if i press CTRL ALTD DEL, but after a few seconds, the disco stroboscope effect appears again. Basically, what he calls "disco stroboscope effect" is a continous and fervent switch between all windows (eve clients), which, as i said, happens very quickly and never stops ( so you can't even log in ).You can quit the game only if you press CTRL ALT DEL and then use the function to send commands to all windows and rapidly quit the application ( and close all windows ). If you don't do that, you're just stuck with the "disco stroboscope effect"...forever. Or until you restart the PC, ofc ))

- And yes, it worked very well before Rubicon release !
- And yes, the game works well if i launch eve normally, without using isboxer/Innerspace. (even after Rubicon launch ), so it must be an isboxer/innerspace problem.

Please fix it when you have time, preferably ASAP.

[Shadowandlight]

I have the same problem as boxbabynl

for me the problem is i start up the clients as soon as multiple clients are started by innerspace it will switch clients on it's own making it impossible to login and creating a disco stroboscope effect

It starts to do this as soon as the third eve client gets loaded. After that, It still continues to load clients (4th, 5th ) at a slower rate, but with the same "disco stroboscope effect" which is an accurate description, even if it sounds weird. Sometimes, it stops if i press CTRL ALTD DEL, but after a few seconds, the disco stroboscope effect appears again. Basically, what he calls "disco stroboscope effect" is a continous and fervent switch between all windows (eve clients), which, as i said, happens very quickly and never stops ( so you can't even log in ).You can quit the game only if you press CTRL ALT DEL and then use the function to send commands to all windows and rapidly quit the application ( and close all windows ). If you don't do that, you're just stuck with the "disco stroboscope effect"...forever. Or until you restart the PC, ofc ))

- And yes, it worked very well before Rubicon release !
- And yes, the game works well if i launch eve normally, without using isboxer/Innerspace. (even after Rubicon launch ), so it must be an isboxer/innerspace problem.

Please fix it when you have time, preferably ASAP.

use directx9 in the meantime ... viewtopic.php?f=8&t=4968

i kinda posted that fix in my third post on this same thread.

and no, the beta versions of inner space are broken the same way. clearly the problem is with dx11, and more specifically its a conflict with the way innerspace is handling resolutions.

its not urgent really, since most people will want to stay on dx9 in the mean time.