Fri Dec 16, 2011 5:40 pm by highliner420
Okay everything is working now. Here is what I found.
Session launched (is2): "C:/Star Wars-The Old Republic/swtor/RetailClient/swtor.exe"
Adapter resolution: 1920x1200
Current display mode: 784x562 (windowed)
Window viewable size: 784x480
Display Scale: 100.0%x85.4%, Distortion: 14.6%
Adapter resolution: 1920x1200
Current display mode: 784x562 (windowed)
Window viewable size: 784x480
Display Scale: 100.0%x85.4%, Distortion: 14.6%
Adapter resolution: 1920x1200
Current display mode: 1067x724 (windowed)
Window viewable size: 1067x724
Display Scale: 100.0%x100.0%, Distortion: 0.0%
Adapter resolution: 1920x1200
Current display mode: 1593x955 (windowed)
Window viewable size: 1593x955
Display Scale: 100.0%x100.0%, Distortion: 0.0%
Adapter resolution: 1920x1200
Current display mode: 1851x1080 (windowed)
Window viewable size: 1851x1080
Display Scale: 100.0%x100.0%, Distortion: 0.0%
The odd "Current Display mode" numbers are what size the IS console window is, I was able to get the numbers to change by resizing the window.
Next up, the odd graphics. As stated earlier my setup is a 24" main and a 22" secondary monitor on one vid card and a 22" mon on another vid card. For troubleshooting purposes I had disconnected the 2nd mon off of the main video card, with no
results. In your last post you mentioned changing the windowed mode around, which I did and noticed both the 24" mon on the main vid card and the 22" mon on the secondary vid card started flickering. So I proceeded to disconnect the monitor
from the secondary vid card and launched SW through ISboxer and everything was correct. So I changed the IS profile and tried 2 instances and everything worked. I hooked up the 22" mon to the main vid card, launched an ISboxer profile with 2
SW instances on the main mon and a dxNothing window on the 2nd monitor and everything worked correctly. I finished by hooking up the 3rd mon to the secondary vid card, launched ISboxer and was greeted by the odd graphics. I disconnected the
3rd mon, launched ISboxer and everything was working correctly again. With some other troubleshooting attempts I found that the mon on the 2nd vid card can't just be powered off, it has to be disconnected from the vid card for everything to
work correctly. After seeing the monitors flickering, I remembered having issues with KOTOR 1, so this could be something to do with Bioware's code. Who knows, I'm no programmer. Thanks for the assistance and hopefully this help you and/or
someone else in the future.