Resolutions and mouse repeating.

[Mahther]

Sorry if this has been brought up. I looked at old posts and couldn't find the answer. Build is 5613. I'm currently using a the two monitor window layout with the master full screen and slaves taking up three corners of the secondary monitor. I could have sworn that during open beta I was able to change the slaves resolutions to something much lower than the master with the same aspect ratio without problems, but I'm trying to do it now and the mouse alignment is off. Should that be possible or am I just remembering it wrongly?

http://www.privatepaste.com/bd6a3775f4

[lax]

I pushed build 5615 live, please try it and see if the problem is resolved

[Mahther]

Each time I start Innerspace now it downloads 5615 and then shuts down. I'm going to try a fresh install.

[Mahther]

Tried installing with the bundle and it does the same thing. Downloads the update and shuts down, start it up again manually and it downloads the same update and shuts down.

Edit: Well, not quite the same thing. Before trying to install with the bundle it would start the console and try and update that way. After the bundle I only get the smaller white updater.

[Mahther]

Ok, I fixed it. I did it the proper way and uninstalled it first this time then ran the bundle and Innerspace is working again.

[Mahther]

Still not aligned with 5615.

[lax]

Which Window Layout are you trying, in the profile you pasted?

[Mahther]

4on2

Sorry I left that out. Stayed up all night again so I'm not too sharp. =\

[Mahther]

I noticed you mention a "scaled to fit" option for mouse repeating in another thread and that fixed my problem. Has that always been there? I had no idea.

[Alge]

I noticed you mention a "scaled to fit" option for mouse repeating in another thread and that fixed my problem. Has that always been there? I had no idea.

Ever since Diablo III has been accessible at least.