Computer freeze 15+ clients
When I run 15 clients at more then 20 fps (lowest settings but 1920*1080), my computer becomes really slow (I can barely open an internet browser even though I can still move characters in the game). I know 15 clients at 20 fps is fairly intense but I expected my computer (posted below) to be able to handle this (have seen posts from 2011 from people running 20+ clients, so I figure if they could do that then it should definitely be no prob now: [link removed].
When I run the game, my processors are below 50 C and are dont really go above 50% (used Open Hardware Monitor to check). My GPU's highest temperature was 61 C and had a max load of 61%. (gpu memory max load: 55%, GPU memory controller max: 36%). Used memory max = 18GB.
Since nothing seems to be capping at its maximum I figure there is another issue but I can't work out what. Is it possible the motherboard can't communicate fast enough between these components? (Bus speed = 100mhz according to Open Hardware Monitor). Any advice or suggestions would be very appreciated.
Computer:
I recently bought a new computer and it has a fresh windows 7 professional install:
Intel Core i7-5820K 3.30GHz (Haswell-E) Socket 2011 Processor (+Enermax ETS-T40-TB 86.7 CFM CPU Cooler)
MSI NVIDIA GTX 970 Gaming Twin Frozr HDMI DVI-I DP Graphics Card (4GB, PCI Express, DDR5, 256 Bit)
ASRock Extreme6 X99 Motherboard Intel S2011-3 AsRock ATX Motherboard
HyperX FURY 32 GB 2133 MHz DDR4 DIMM Memory Kit
Samsung 850 EVO-Series 1TB 2.5" Solid State Drive
Corsair CC-9011049-WW Obsidian Series 450D Windowed Mid-Tower ATX High Airflow Performance Computer Case
Corsair CP-9020077-UK Builder Series 650W CS650M ATX/EPS Semi-Modular 80 Plus Gold Power Supply Unit
Thank you for any advice.
When I run the game, my processors are below 50 C and are dont really go above 50% (used Open Hardware Monitor to check). My GPU's highest temperature was 61 C and had a max load of 61%. (gpu memory max load: 55%, GPU memory controller max: 36%). Used memory max = 18GB.
Since nothing seems to be capping at its maximum I figure there is another issue but I can't work out what. Is it possible the motherboard can't communicate fast enough between these components? (Bus speed = 100mhz according to Open Hardware Monitor). Any advice or suggestions would be very appreciated.
Computer:
I recently bought a new computer and it has a fresh windows 7 professional install:
Intel Core i7-5820K 3.30GHz (Haswell-E) Socket 2011 Processor (+Enermax ETS-T40-TB 86.7 CFM CPU Cooler)
MSI NVIDIA GTX 970 Gaming Twin Frozr HDMI DVI-I DP Graphics Card (4GB, PCI Express, DDR5, 256 Bit)
ASRock Extreme6 X99 Motherboard Intel S2011-3 AsRock ATX Motherboard
HyperX FURY 32 GB 2133 MHz DDR4 DIMM Memory Kit
Samsung 850 EVO-Series 1TB 2.5" Solid State Drive
Corsair CC-9011049-WW Obsidian Series 450D Windowed Mid-Tower ATX High Airflow Performance Computer Case
Corsair CP-9020077-UK Builder Series 650W CS650M ATX/EPS Semi-Modular 80 Plus Gold Power Supply Unit
Thank you for any advice.