League of Extraordinary Multiboxers
Posts: 4591
Joined: Sat Feb 15, 2014 11:14 am
Location: In the dining room, with the lead pipe.
Re: Focus Window Action issues
lax wrote:4) Key press Limit
So for the round-Robin I have to press the key 9 times.
Is there a way I could put a limit on it so that it does not do anything after 9 presses but maybe make a sound to say all done?
If I press F1 9 times to turn on mining then if I press it 10 times it will turn off the 1st one.
When editing Steps, at the top is options that say "Do not advance" and such. You can add Step 10, put a Sound Action in it, and set it to "Do not advance for at least ___ seconds" (like 0.5 seconds, or whatever you're comfortable with). So you press the key 12 times out of haste, it gets to the end and plays the sound one or more times instead of wrapping back to #1 instantly. You can set it longer if you want. In the "Advanced" settings for your Mapped Key, you can set it to reset to step 1 after some amount of time.
Worth pointing out, you will need to make a "manual round robin" for this, as you can't just have Step 1, Step 10. You would need to have 9 prior steps all which send the keypress/mouse1 to the various slots.
e.g.
Manual Round Robin
Step 1 -> Keystroke Action F1 to slot 1
Step 2 -> Keystroke Action F1 to slot 2
Step 3 -> Keystroke Action F1 to slot 3
Step 4 -> Keystroke Action F1 to slot 4
Step 5 -> Keystroke Action F1 to slot 5
Step 6 -> Keystroke Action F1 to slot 6
Step 7 -> Keystroke Action F1 to slot 7
Step 8 -> Keystroke Action F1 to slot 8
Step 9 -> Keystroke Action F1 to slot 9
Step 10 -> Play Sound to self, do not advance to next step for 2 seconds